\n\n\t| ISO 2339<\/td> | DIN 1<\/td> | -<\/td> | Cone Pins, untempered<\/td>\n<\/tr>\n |
\n\t| ISO 7089<\/td> | DIN 125<\/td> | -<\/td> | Washers; medium type, primarily for hexagon bolts<\/td>\n<\/tr>\n |
\n\t| ISO 7090<\/td> | DIN 125<\/td> | -<\/td> | Washers; medium type, primarily for hexagon bolts<\/td>\n<\/tr>\n |
\n\t| ISO 7091<\/td> | DIN 126<\/td> | -<\/td> | Product grade C washers - designed for use with hexagon head bolts and nut<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 127<\/td> | BS4464B<\/td> | Spring lock washers with square ends or tang ends<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 128<\/td> | -<\/td> | Curved and wave spring lock washers<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 137<\/td> | -<\/td> | Spring washers, curved or wave<\/td>\n<\/tr>\n |
\n\t| ISO 8738<\/td> | DIN 1440<\/td> | -<\/td> | Medium type washers for pins<\/td>\n<\/tr>\n |
\n\t| ISO 2340<\/td> | DIN 1443<\/td> | -<\/td> | Clevis pins without head<\/td>\n<\/tr>\n |
\n\t| ISO 2341<\/td> | DIN 1444<\/td> | -<\/td> | Clevis pins with head<\/td>\n<\/tr>\n |
\n\t| ISO 8739<\/td> | DIN 1470<\/td> | -<\/td> | Grooved Pins, Full Length Parallel-grooved with Pilot<\/td>\n<\/tr>\n |
\n\t| ISO 8744<\/td> | DIN 1471<\/td> | -<\/td> | Grooved Pins, Full Length Taper-grooved<\/td>\n<\/tr>\n |
\n\t| ISO 8745<\/td> | DIN 1472<\/td> | -<\/td> | Grooved Pins, Half Length Taper-grooved<\/td>\n<\/tr>\n |
\n\t| ISO 8740<\/td> | DIN 1473<\/td> | -<\/td> | Grooved Pins, Full Length Parallel-grooved with Chamfer<\/td>\n<\/tr>\n |
\n\t| ISO 8741<\/td> | DIN 1474<\/td> | -<\/td> | Grooved Pins, Half Length Reverse-grooved<\/td>\n<\/tr>\n |
\n\t| ISO 8742<\/td> | DIN 1475<\/td> | -<\/td> | Grooved Pins, Third Length Centre-grooved<\/td>\n<\/tr>\n |
\n\t| ISO 8746<\/td> | DIN 1476<\/td> | -<\/td> | Round Head Grooved Pins<\/td>\n<\/tr>\n |
\n\t| ISO 8747<\/td> | DIN 1477<\/td> | -<\/td> | Countersunk Head Grooved Pins<\/td>\n<\/tr>\n |
\n\t| ISO 8752<\/td> | DIN 1481<\/td> | -<\/td> | Spring-Type Straight Pins (Roll Pins) - Heavy Type<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 1587<\/td> | -<\/td> | Hexagon domed cap nuts<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 1816<\/td> | -<\/td> | Round Nut with Set Pin Holes Inside; ISO Metric Fine Thread<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 315<\/td> | -<\/td> | Wing nuts with rounded wings<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 316<\/td> | -<\/td> | Wing screws with rounded wings<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 404<\/td> | -<\/td> | Slotted capstan screws<\/td>\n<\/tr>\n |
\n\t| ISO 7435<\/td> | DIN 417<\/td> | -<\/td> | Slotted set screws with long dog point<\/td>\n<\/tr>\n |
\n\t| ISO 2342<\/td> | DIN 427<\/td> | -<\/td> | Slotted headless screws with chamfered end<\/td>\n<\/tr>\n |
\n\t| ISO 4034<\/td> | DIN 428<\/td> | -<\/td> | Hexagon nuts, Grade C<\/td>\n<\/tr>\n |
\n\t| ISO 7092<\/td> | DIN 433<\/td> | -<\/td> | Washers for use with cheese head screws<\/td>\n<\/tr>\n |
\n\t| ISO 7092<\/td> | DIN 433-1<\/td> | -<\/td> | Product grade A washers - with a hardness up to 250 HV designed for use with cheese head screws<\/td>\n<\/tr>\n |
\n\t| ISO 7092<\/td> | DIN 433-2<\/td> | -<\/td> | Product grade A washers - with a hardness up to 300 HV designed for use with cheese head screws<\/td>\n<\/tr>\n |
\n\t| ISO 7436<\/td> | DIN 438<\/td> | -<\/td> | Slotted set screws with cup point<\/td>\n<\/tr>\n |
\n\t| ISO 4035<\/td> | DIN 439<\/td> | BS3692<\/td> | Hexagon thin nuts<\/td>\n<\/tr>\n |
\n\t| ISO 4036<\/td> | DIN 439<\/td> | BS3692<\/td> | Hexagon thin nuts<\/td>\n<\/tr>\n |
\n\t| ISO 8675<\/td> | DIN 439<\/td> | BS3692<\/td> | Hexagon thin nuts<\/td>\n<\/tr>\n |
\n\t| ISO 4036<\/td> | DIN 439-1<\/td> | -<\/td> | Unchamfered hexagon thin nuts - Product grade B<\/td>\n<\/tr>\n |
\n\t| ISO 4035<\/td> | DIN 439-2<\/td> | -<\/td> | Chamfered hexagon thin nuts - Product grades A and B<\/td>\n<\/tr>\n |
\n\t| ISO 8675<\/td> | DIN 439-2<\/td> | -<\/td> | Chamfered hexagon thin nuts - Product grades A and B<\/td>\n<\/tr>\n |
\n\t| ISO 7094<\/td> | DIN 440<\/td> | -<\/td> | Washers for use in timber constructions<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 444<\/td> | -<\/td> | Eyebolts<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 462<\/td> | -<\/td> | Machine Tools; Internal Tab Washers for Slotted Round Nuts for Hook Spanner according to DIN 1804<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 464<\/td> | -<\/td> | Knurled thumb screws, high type<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 466<\/td> | -<\/td> | Knurled nuts, high type<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 467<\/td> | -<\/td> | Knurled nuts, low type<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 471<\/td> | -<\/td> | Circlips (retaining rings) for shafts; Normal type and heavy type<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 479<\/td> | -<\/td> | Square head bolts with short dog point<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 5406<\/td> | -<\/td> | Lockwashers and locking plates for use with rolling bearings<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 548<\/td> | -<\/td> | Round nuts with set pin holes in side<\/td>\n<\/tr>\n |
\n\t| ISO 4766<\/td> | DIN 551<\/td> | -<\/td> | Slotted set screws with flat point<\/td>\n<\/tr>\n |
\n\t| ISO 7434<\/td> | DIN 553<\/td> | -<\/td> | Slotted set screws with cone point<\/td>\n<\/tr>\n |
\n\t| ISO 4034<\/td> | DIN 555<\/td> | -<\/td> | M5 to M100x6 hexagon nuts - Product grade C<\/td>\n<\/tr>\n |
\n\t| ISO 4018<\/td> | DIN 558<\/td> | -<\/td> | Hexagon head screws<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 580<\/td> | -<\/td> | Collar eyebolts for lifting purposes<\/td>\n<\/tr>\n |
\n\t| ISO 4016<\/td> | DIN 601<\/td> | -<\/td> | M5 to M52 hexagon head bolts; product grade C<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 603<\/td> | -<\/td> | Mushroom head square neck bolts<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 609<\/td> | -<\/td> | Hexagon fits bolts with long thread<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 6319<\/td> | -<\/td> | Spherical washers and conical seats<\/td>\n<\/tr>\n |
\n\t| ISO 8734<\/td> | DIN 6325<\/td> | -<\/td> | Parallel Pins, Hardened; Tolerance Zone m6<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 6340<\/td> | -<\/td> | Washers for clamping devices<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 653<\/td> | -<\/td> | Knurled thumb screws, low type<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 6797<\/td> | -<\/td> | Toothed lock washers<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 6798<\/td> | -<\/td> | Serrated lock washers<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 6799<\/td> | -<\/td> | Lock washers (retaining washers) for shafts<\/td>\n<\/tr>\n |
\n\t| ISO 10644<\/td> | DIN 6900<\/td> | -<\/td> | Screw and Washer Assemblies<\/td>\n<\/tr>\n |
\n\t| ISO 10510<\/td> | DIN 6901<\/td> | -<\/td> | Tapping screw and washer assemblies<\/td>\n<\/tr>\n |
\n\t| ISO 10673<\/td> | DIN 6902<\/td> | -<\/td> | Plain washers for screw and washer assemblies<\/td>\n<\/tr>\n |
\n\t| ISO 10669<\/td> | DIN 6903<\/td> | -<\/td> | Plain washers for tapping screw and washer assemblies<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 6912<\/td> | -<\/td> | Hexagon socket thin head cap screws with pilot recess<\/td>\n<\/tr>\n |
\n\t| ISO 14399-4<\/td> | DIN 6914<\/td> | -<\/td> | High-strength hexagon head bolts with large widths across flats for structural steel bolting<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 6916<\/td> | -<\/td> | Round washers for high-strength structural steel bolting<\/td>\n<\/tr>\n |
\n\t| ISO 1665<\/td> | DIN 6921<\/td> | -<\/td> | Hexagon flange bolts<\/td>\n<\/tr>\n |
\n\t| ISO 1665<\/td> | DIN 6922<\/td> | -<\/td> | Hexagon flange bolts with reduced shank<\/td>\n<\/tr>\n |
\n\t| ISO 1661<\/td> | DIN 6923<\/td> | -<\/td> | Hexagon nuts with flange<\/td>\n<\/tr>\n |
\n\t| ISO 7040<\/td> | DIN 6924<\/td> | -<\/td> | Prevailing torque type hexagon nuts with nonmetallic insert<\/td>\n<\/tr>\n |
\n\t| ISO 10512<\/td> | DIN 6924<\/td> | -<\/td> | Prevailing torque type hexagon nuts with nonmetallic insert<\/td>\n<\/tr>\n |
\n\t| ISO 7042<\/td> | DIN 6925<\/td> | -<\/td> | Prevailing torque type all-metal hexagon nuts<\/td>\n<\/tr>\n |
\n\t| ISO 10513<\/td> | DIN 6925<\/td> | -<\/td> | Prevailing torque type all-metal hexagon nuts<\/td>\n<\/tr>\n |
\n\t| ISO 7043<\/td> | DIN 6926<\/td> | -<\/td> | Prevailing torque type hexagon nuts with flange and with non-metallic insert<\/td>\n<\/tr>\n |
\n\t| ISO 12125<\/td> | DIN 6926<\/td> | -<\/td> | Prevailing torque type hexagon nuts with flange and with non-metallic insert<\/td>\n<\/tr>\n |
\n\t| ISO 7044\u00a0<\/td> | DIN 6927<\/td> | -<\/td> | Prevailing torque type all-metal nuts with flange<\/td>\n<\/tr>\n |
\n\t| ISO 12126\u00a0<\/td> | DIN 6927<\/td> | -<\/td> | Prevailing torque type all-metal nuts with flange<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 7045<\/td> | -<\/td> | Pan head screws with type H or type Z cross recess - product grade A<\/td>\n<\/tr>\n |
\n\t| ISO 14589<\/td> | DIN 7337<\/td> | -<\/td> | Break mandrel blind rivets<\/td>\n<\/tr>\n |
\n\t| ISO 15977 to ISO 15984<\/td> | DIN 7337<\/td> | -<\/td> | Break mandrel blind rivets<\/td>\n<\/tr>\n |
\n\t| ISO 16582 to ISO 16584<\/td> | DIN 7337<\/td> | -<\/td> | Break mandrel blind rivets<\/td>\n<\/tr>\n |
\n\t| ISO 8750<\/td> | DIN 7343<\/td> | -<\/td> | Spiral Pins; Normal Type<\/td>\n<\/tr>\n |
\n\t| ISO 8748<\/td> | DIN 7344<\/td> | -<\/td> | Spiral Pins; Heavy Duty Type<\/td>\n<\/tr>\n |
\n\t| ISO 13337<\/td> | DIN 7346<\/td> | -<\/td> | Spring-Type Straight Pins; (Roll Pins) Light-weight Type<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 7349<\/td> | -<\/td> | Plain Washers for Bolts with Heavy Clamping Sleeves<\/td>\n<\/tr>\n |
\n\t| ISO 7085<\/td> | DIN 7500-1<\/td> | -<\/td> | Thread rolling screws for metric ISO thread - Part 1: Types, designation, requirements<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 7500-2<\/td> | -<\/td> | Thread rolling screws for ISO metric thread; guideline values for hole diameters<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 7504<\/td> | -<\/td> | Self-drilling screws with tapping screw thread - Dimensions, requirements and testing<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 7513<\/td> | -<\/td> | Hexagon head and slotted head thread cutting screws - Dimensions, requirements and testing<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 7516<\/td> | -<\/td> | Cross recessed head thread cutting screws - Dimensions, requirements and testing<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 7603<\/td> | -<\/td> | Ring seals and gaskets<\/td>\n<\/tr>\n |
\n\t| ISO 1478<\/td> | DIN 7970<\/td> | -<\/td> | Threads and thread ends for tapping screws (modified version of ISO 1478)<\/td>\n<\/tr>\n |
\n\t| ISO 1481<\/td> | DIN 7971<\/td> | BS4174<\/td> | Slotted pan head tapping screws<\/td>\n<\/tr>\n |
\n\t| ISO 1482<\/td> | DIN 7972<\/td> | -<\/td> | Slotted countersunk head tapping screws<\/td>\n<\/tr>\n |
\n\t| ISO 1483<\/td> | DIN 7973<\/td> | -<\/td> | Slotted raised countersunk head tapping screws<\/td>\n<\/tr>\n |
\n\t| ISO 8737<\/td> | DIN 7977<\/td> | -<\/td> | Taper Pins with Thread Ends and Constant Point Lengths<\/td>\n<\/tr>\n |
\n\t| ISO 8736<\/td> | DIN 7978<\/td> | -<\/td> | Taper Pins with Internal Thread<\/td>\n<\/tr>\n |
\n\t| ISO 8733<\/td> | DIN 7979<\/td> | -<\/td> | Parallel Pins with Internal Thread<\/td>\n<\/tr>\n |
\n\t| ISO 8735<\/td> | DIN 7979<\/td> | -<\/td> | Parallel Pins with Internal Thread<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 7980<\/td> | BS4464A<\/td> | Spring lock washers with square ends for cheese head screws<\/td>\n<\/tr>\n |
\n\t| ISO 7049<\/td> | DIN 7981<\/td> | -<\/td> | Cross recessed pan head tapping screws<\/td>\n<\/tr>\n |
\n\t| ISO 7050<\/td> | DIN 7982<\/td> | -<\/td> | Cross recessed countersunk head tapping screws<\/td>\n<\/tr>\n |
\n\t| ISO 7051<\/td> | DIN 7983<\/td> | -<\/td> | Countersunk (Flat) Head Tapping Screws with Cross Recess<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 7984<\/td> | -<\/td> | Hexagon socket thin head cap screws<\/td>\n<\/tr>\n |
\n\t| ISO 7045<\/td> | DIN 7985<\/td> | BS4183<\/td> | Cross recessed raised Phillips Pan head screws<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 7989-1<\/td> | -<\/td> | Washers for steel structures - Product grade C<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 7989-2<\/td> | -<\/td> | Washers for steel structures - Product grade A<\/td>\n<\/tr>\n |
\n\t| ISO 10642<\/td> | DIN 7991<\/td> | BS4168<\/td> | Hexagon socket countersunk head cap screws<\/td>\n<\/tr>\n |
\n\t| ISO 1207<\/td> | DIN 84<\/td> | BS4183<\/td> | Product grade A slotted cheese head screws<\/td>\n<\/tr>\n |
\n\t| ISO 1580<\/td> | DIN 85<\/td> | BS4183<\/td> | Product grade A slotted pan head screws<\/td>\n<\/tr>\n |
\n\t| ISO 7093<\/td> | DIN 9021<\/td> | -<\/td> | Plain washers with large outside diameter<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 908<\/td> | -<\/td> | Hexagon socket screw plugs with parallel screw thread<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 910<\/td> | -<\/td> | Hexagon-duty hexagon head screw plugs<\/td>\n<\/tr>\n |
\n\t| ISO 2936<\/td> | DIN 911<\/td> | -<\/td> | Hexagon Socket Screw Keys<\/td>\n<\/tr>\n |
\n\t| ISO 4762<\/td> | DIN 912<\/td> | BS4168<\/td> | Hexagon socket head cap screws (modified version of ISO 4762)<\/td>\n<\/tr>\n |
\n\t| \u00a0ISO 21268<\/td> | DIN 912<\/td> | BS4168<\/td> | Hexagon socket head cap screws (modified version of ISO 4762)<\/td>\n<\/tr>\n |
\n\t| ISO 4026<\/td> | DIN 913<\/td> | -<\/td> | Hexagon socket set screws with flat point (ISO 4026 modified)<\/td>\n<\/tr>\n |
\n\t| ISO 4027<\/td> | DIN 914<\/td> | -<\/td> | Hexagon socket set screws with cone point (ISO 4029 modified)<\/td>\n<\/tr>\n |
\n\t| ISO 4028<\/td> | DIN 915<\/td> | -<\/td> | Hexagon socket set screws with full dog point<\/td>\n<\/tr>\n |
\n\t| ISO 4029<\/td> | DIN 916<\/td> | -<\/td> | Hexagon socket set screws with cup point (ISO 4029 modified)<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 918-3<\/td> | -<\/td> | Overview of European Standards for fasteners<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 921<\/td> | -<\/td> | Slotted pan head screws with large head<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 923<\/td> | -<\/td> | Slotted pan head screws with shoulder<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 929<\/td> | -<\/td> | Hexagon weld nuts<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 93<\/td> | -<\/td> | Tab washers with long tab<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 930<\/td> | -<\/td> | Fine thread pitch partially threaded screws<\/td>\n<\/tr>\n |
\n\t| ISO 4014<\/td> | DIN 931-1<\/td> | BS3692<\/td> | M1,6 to M39 Hexagon Cap Screws Partially Threaded - Product grades A and B<\/td>\n<\/tr>\n |
\n\t| ISO 4014<\/td> | DIN 931-2<\/td> | BS3692<\/td> | M42 to M160x6 Hexagon Cap Screws Partially Threaded - Product grade B<\/td>\n<\/tr>\n |
\n\t| ISO 4017<\/td> | DIN 933<\/td> | BS3692<\/td> | M1,6 to M52 Hexagon Cap Screws Fully Threaded - Product grades 8.8<\/td>\n<\/tr>\n |
\n\t| ISO 4032<\/td> | DIN 934<\/td> | -<\/td> | Hexagon nuts with metric coarse and fine pitch thread - Product classes A and B<\/td>\n<\/tr>\n |
\n\t| ISO 8673<\/td> | DIN 934<\/td> | -<\/td> | Hexagon nuts with metric coarse and fine pitch thread - Product classes A and B<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 935-1<\/td> | -<\/td> | Hexagon slotted nuts and castle nuts with metric coarse and fine pitch thread - Product grades A and B<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 935-2<\/td> | -<\/td> | M42 to M160x6 hexagon head bolts; product grade B<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 935-3<\/td> | -<\/td> | Hexagon slotted nuts with metric coarse pitch thread - Product grade C<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 936<\/td> | BS3692<\/td> | M8 to M52 and M8x1 to M52x3 hexagon thin nuts; product grades A and B<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 937<\/td> | -<\/td> | Hexagon thin castle nuts<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 938<\/td> | -<\/td> | Studs with a length of engagement equal to about 1 d<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 939<\/td> | -<\/td> | Studs with a length of engagement equal to about 1,25 d<\/td>\n<\/tr>\n |
\n\t| ISO 1234<\/td> | DIN 94<\/td> | -<\/td> | Split pins<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 95<\/td> | -<\/td> | Slotted Raised Countersunk (Oval) Head Wood Screws<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 96<\/td> | -<\/td> | Slotted Round Head Wood Screws<\/td>\n<\/tr>\n |
\n\t| ISO 8765<\/td> | DIN 960<\/td> | -<\/td> | M8x1 to M100x4 hexagon head bolts with fine pitch thread - Product grades A and B<\/td>\n<\/tr>\n |
\n\t| ISO 8676<\/td> | DIN 960<\/td> | -<\/td> | M8x1 to M100x4 hexagon head bolts with fine pitch thread - Product grades A and B<\/td>\n<\/tr>\n |
\n\t| ISO 8676<\/td> | DIN 961<\/td> | -<\/td> | M8x1 to M52x3 hexagon head bolts with fine pitch thread - Product grades A and B<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 962<\/td> | -<\/td> | Designation system for fasteners<\/td>\n<\/tr>\n |
\n\t| ISO 2009<\/td> | DIN 963<\/td> | BS3692<\/td> | Slotted countersunk head screws (with countersunk heads as specified in ISO 2009-1972)<\/td>\n<\/tr>\n |
\n\t| ISO 2010<\/td> | DIN 964<\/td> | BS3692<\/td> | Slotted raised countersunk oval head screws<\/td>\n<\/tr>\n |
\n\t| ISO 7046<\/td> | DIN 965<\/td> | BS3692<\/td> | Cross recessed countersunk flat head screws<\/td>\n<\/tr>\n |
\n\t| ISO 7047<\/td> | DIN 966<\/td> | -<\/td> | Cross recessed raised countersunk head screws<\/td>\n<\/tr>\n |
\n\t| ISO 4032<\/td> | DIN 970<\/td> | -<\/td> | Hexagon nuts; Style 1; Metric coarse thread, Product grades A and B; ISO 4032 modified<\/td>\n<\/tr>\n |
\n\t| ISO 8673<\/td> | DIN 971-1<\/td> | -<\/td> | Style 1 hexagon nuts with metric fine pitch thread; property classes 6 and 8<\/td>\n<\/tr>\n |
\n\t| ISO 8674<\/td> | DIN 971-2<\/td> | -<\/td> | Style 2 hexagon nuts with metric fine pitch thread; property classes 10 and 12<\/td>\n<\/tr>\n |
\n\t| ISO 4034<\/td> | DIN 972<\/td> | -<\/td> | M5 to M39 hexagon nuts; style 1; product grade C (modified version of ISO 4034)<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 975<\/td> | -<\/td> | Threaded rods<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 976-1<\/td> | -<\/td> | Metric thread stud bolts<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 976-2<\/td> | -<\/td> | Metric interference-fit thread stud bolts<\/td>\n<\/tr>\n |
\n\t| ISO 21670<\/td> | DIN 977<\/td> | -<\/td> | Hexagon weld nuts with flange<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 979<\/td> | -<\/td> | Hexagon thin slotted nuts and castle nuts with metric coarse and fine pitch thread - Product grades A and B<\/td>\n<\/tr>\n |
\n\t| ISO 7042<\/td> | DIN 980<\/td> | -<\/td> | All-metal prevailing torque type hexagon nuts<\/td>\n<\/tr>\n |
\n\t| ISO 10513<\/td> | DIN 980<\/td> | -<\/td> | All-metal prevailing torque type hexagon nuts<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 981<\/td> | -<\/td> | Locknuts for use with rolling bearings<\/td>\n<\/tr>\n |
\n\t| ISO 7040<\/td> | DIN 982<\/td> | -<\/td> | Prevailing torque type hexagon nuts with nonmetallic insert<\/td>\n<\/tr>\n |
\n\t| ISO 10512<\/td> | DIN 982<\/td> | -<\/td> | Prevailing torque type hexagon nuts with nonmetallic insert<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 983<\/td> | -<\/td> | Retaining rings with lugs for use on shafts (external circlips)<\/td>\n<\/tr>\n |
\n\t| ISO 10511<\/td> | DIN 985<\/td> | -<\/td> | Prevailing torque type hexagon thin nuts with nonmetallic insert<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 986<\/td> | -<\/td> | Prevailing torque type hexagon domed cap nuts with non-metallic insert<\/td>\n<\/tr>\n |
\n\t| -<\/td> | DIN 988<\/td> | -<\/td> | Shim rings and supporting rings<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n<\/div><\/div> * Calculated with: HB = 0,95 \u00b7 HV<\/p>\n<\/div><\/div><\/div><\/div><\/div> Let Us Help You Find Efficiencies<\/p>\n<\/div><\/div><\/div> CONTACT US<\/a><\/p>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/p>","protected":false},"excerpt":{"rendered":"","protected":false},"author":38,"featured_media":11706,"parent":11686,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false,"content-type":"","footnotes":""},"class_list":["post-11937","page","type-page","status-publish","has-post-thumbnail","hentry"],"acf":[],"_links":{"self":[{"href":"https:\/\/optimas.com\/en_gb\/wp-json\/wp\/v2\/pages\/11937","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/optimas.com\/en_gb\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/optimas.com\/en_gb\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/optimas.com\/en_gb\/wp-json\/wp\/v2\/users\/38"}],"replies":[{"embeddable":true,"href":"https:\/\/optimas.com\/en_gb\/wp-json\/wp\/v2\/comments?post=11937"}],"version-history":[{"count":1,"href":"https:\/\/optimas.com\/en_gb\/wp-json\/wp\/v2\/pages\/11937\/revisions"}],"predecessor-version":[{"id":16423,"href":"https:\/\/optimas.com\/en_gb\/wp-json\/wp\/v2\/pages\/11937\/revisions\/16423"}],"up":[{"embeddable":true,"href":"https:\/\/optimas.com\/en_gb\/wp-json\/wp\/v2\/pages\/11686"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/optimas.com\/en_gb\/wp-json\/wp\/v2\/media\/11706"}],"wp:attachment":[{"href":"https:\/\/optimas.com\/en_gb\/wp-json\/wp\/v2\/media?parent=11937"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}} |