ISO 公制螺紋公差
Optimas 是一家提供全方位服務的供應鏈和製造解決方案供應商。在設計下一個產品或更新現有產品之前，請考慮與 Optimas 合作以利用我們的眾多功能。
The International Organization for Standardization (ISO) set the standard for limits of metric screw thread. ISO 965 specifies the basic profile for ISO general purpose metric screw threads (M) conforming to ISO 261.
The information below can be used to calculate the values of thread tolerances defined by ISO 965/1. Screw threads are usually signified by two tolerances. One is for the maximum outside diameter, measured from the major diameter of the thread, and the other is for the pitch diameter, measured from the midpoint of each tooth.
Dimensions in millimetres (mm). Tolerances 6g (6h). For guidance only.
| 螺紋尺寸 | 訂婚 長度從 | 訂婚 長度至 | 大直徑 （最大限度） | 大直徑 （分鐘） | 節徑 （最大限度） | 節徑 （分鐘） | 螺紋根 半徑（最小） |
|---|---|---|---|---|---|---|---|
| M1 | 0.6 | 1.7 | 1 | 0.933 | 0.838 | 0.785 | 0.031 |
| M1.2 | 0.6 | 1.7 | 1.2 | 1.133 | 1.038 | 0.985 | 0.031 |
| M1.4 | 0.7 | 2 | 1.4 | 1.325 | 1.205 | 1.149 | 0.038 |
| M1.6 | 0.8 | 2.6 | 1.581 | 1.496 | 1.354 | 1.291 | 0.044 |
| M1.8 | 0.8 | 2.6 | 1.781 | 1.696 | 1.554 | 1.491 | 0.044 |
| M2 | 1 | 3 | 1.981 | 1.886 | 1.721 | 1.654 | 0.05 |
| M2.5 | 1.3 | 3.8 | 2.48 | 2.38 | 2.118 | 2.117 | 0.056 |
| M3 | 1.5 | 4.5 | 2.98 | 2.874 | 2.655 | 2.58 | 0.063 |
| M3.5 | 1.7 | 5 | 3.479 | 3.354 | 3.089 | 3.004 | 0.075 |
| M4 | 2 | 6 | 3.978 | 3.838 | 3.523 | 3.433 | 0.088 |
| M5 | 2.5 | 7.5 | 4.976 | 4.826 | 4.456 | 4.361 | 0.1 |
| M6 | 3 | 12 | 5.974 | 5.794 | 5.324 | 5.212 | 0.125 |
| M7 | 3 | 3 | 6.974 | 6.794 | 6.324 | 6.212 | 0.125 |
| M8 | 4 | 12 | 7.972 | 7.76 | 7.16 | 7.042 | 0.156 |
| M10 | 5 | 15 | 9.968 | 9.732 | 8.994 | 8.862 | 0.188 |
| M12 | 6 | 18 | 11.966 | 11.701 | 10.829 | 10.679 | 0.219 |
| M14 | 8 | 24 | 13.962 | 13.682 | 12.663 | 12.503 | 0.25 |
| M16 | 8 | 24 | 15.962 | 15.682 | 14.663 | 14.503 | 0.25 |
| M18 | 10 | 30 | 17.958 | 17.623 | 16.334 | 16.164 | 0.313 |
| M20 | 10 | 30 | 19.958 | 19.623 | 18.334 | 18.164 | 0.313 |
| M22 | 10 | 30 | 21.958 | 21.623 | 20.334 | 20.164 | 0.313 |
| M24 | 12 | 36 | 23.952 | 23.577 | 22.003 | 21.803 | 0.375 |
| M27 | 12 | 36 | 26.952 | 26.577 | 25.003 | 24.803 | 0.375 |
| M30 | 15 | 45 | 29.947 | 29.522 | 27.674 | 27.462 | 0.438 |
| M33 | 15 | 45 | 32.947 | 32.522 | 30.674 | 30.462 | 0.438 |
| M36 | 18 | 53 | 35.94 | 35.465 | 33.342 | 33.118 | 0.5 |
| M39 | 18 | 53 | 38.94 | 38.465 | 36.342 | 36.118 | 0.5 |
| 螺紋尺寸 | 訂婚 長度從 | 訂婚 長度至 | 大直徑 （最大限度） | 大直徑 （分鐘） | 節徑 （最大限度） | 節徑 （分鐘） | 螺紋根 半徑（最小） |
|---|---|---|---|---|---|---|---|
| M8×1 | 3 | 9 | 7.794 | 7.794 | 7.324 | 7.212 | 0.125 |
| M10×1 | 3 | 9 | 9.974 | 9.794 | 9.324 | 9212 | 0.156 |
| M10x1.25 | 4 | 12 | 9.972 | 9.76 | 9.16 | 9.042 | 0.156 |
| M12x1.25 | 4.5 | 13 | 11.972 | 11.76 | 11.16 | 11.028 | 0.156 |
| M12x1.5 | 5.6 | 16 | 11.968 | 11.732 | 10.994 | 10.854 | 0.156 |
| M14x1,5 | 5.6 | 16 | 13.968 | 13.732 | 12.994 | 12.854 | 0.188 |
| M16x1.5 | 5.6 | 16 | 15.968 | 15.732 | 14.994 | 14.854 | 0.188 |
| M18x1.5 | 5.6 | 16 | 17.968 | 17.732 | 16.994 | 16.854 | 0.188 |
| M18×2 | 8 | 24 | 17.952 | 17.682 | 16.663 | 0.188 | 0.188 |
| M20x1.5 | 5.6 | 16 | 19.968 | 19.732 | 18.994 | 18.854 | 0.188 |
| M20×2 | 8 | 24 | 19.962 | 19.682 | 18.663 | 18.503 | 0.188 |
| M22x1.5 | 5.6 | 16 | 21.968 | 21.732 | 20.994 | 20.854 | 0.188 |
| M22×2 | 8 | 24 | 21.962 | 21.682 | 20.663 | 20.503 | 0.188 |
| M24×2 | 8.5 | 25 | 23.962 | 23.682 | 22.663 | 22.493 | 0.25 |
| M27×2 | 8.5 | 25 | 26.962 | 26.682 | 25.663 | 25.493 | 0.25 |
| M30×2 | 8.5 | 25 | 29.962 | 29.682 | 28.663 | 28.493 | 0.25 |
| M33×2 | 8.5 | 25 | 32.962 | 32.682 | 31.663 | 31.493 | 0.25 |
| M36x3 | 12 | 36 | 35.952 | 35.577 | 34.003 | 33.803 | 0.375 |
| M39x3 | 12 | 36 | 38.952 | 38.577 | 37.003 | 36.803 | 0.375 |
讓我們幫助您提高效率
香港中文 
English 
Español de México 
Español 
简体中文 
Français 
Türkçe 
Deutsch 
Italiano 
日本語 
English (UK) 
Français du Canada 