ISO Metrik Vida Dişi Toleransları
Optimas is a full-service supply chain and manufacturing solutions provider. Before designing a new product or updating an existing one, consider partnering with Optimas to leverage our mühendislik, üretme, Ve tedarik zinciri expertise.
The International Organization for Standardization (ISO) sets the standard for limits of metric screw threads. ISO 965 specifies the basic profile for ISO general-purpose metric screw threads (M) conforming to ISO 261.
The information below can be used to calculate the values of thread tolerances defined by ISO 965/1. Screw threads are usually signified by two tolerances. One is for the maximum outside diameter, measured from the metric screw diameter or major diameter of the thread. The other is for the pitch diameter, measured from the midpoint of each tooth.
Dimensions in millimetres (mm). Tolerances 6g (6h). For guidance only.
| Konu Boyutu | Nişanlanmak Uzunluk Başlangıç Tarihi: | Nişanlanmak Uzunluk | Büyük çap (Maks.) | Büyük çap (Dk.) | Saha çapı (Maks.) | Saha çapı (Dk.) | Konu Kökü Yarıçap (Min) |
|---|---|---|---|---|---|---|---|
| M1 | 0.6 | 1.7 | 1 | 0.933 | 0.838 | 0.785 | 0.031 |
| M1.2 | 0.6 | 1.7 | 1.2 | 1.133 | 1.038 | 0.985 | 0.031 |
| M1.4 | 0.7 | 2 | 1.4 | 1.325 | 1.205 | 1.149 | 0.038 |
| M1.6 | 0.8 | 2.6 | 1.581 | 1.496 | 1.354 | 1.291 | 0.044 |
| M1.8 | 0.8 | 2.6 | 1.781 | 1.696 | 1.554 | 1.491 | 0.044 |
| M2 | 1 | 3 | 1.981 | 1.886 | 1.721 | 1.654 | 0.05 |
| M2.5 | 1.3 | 3.8 | 2.48 | 2.38 | 2.118 | 2.117 | 0.056 |
| M3 | 1.5 | 4.5 | 2.98 | 2.874 | 2.655 | 2.58 | 0.063 |
| M3.5 | 1.7 | 5 | 3.479 | 3.354 | 3.089 | 3.004 | 0.075 |
| M4 | 2 | 6 | 3.978 | 3.838 | 3.523 | 3.433 | 0.088 |
| M5 | 2.5 | 7.5 | 4.976 | 4.826 | 4.456 | 4.361 | 0.1 |
| M6 | 3 | 12 | 5.974 | 5.794 | 5.324 | 5.212 | 0.125 |
| M7 | 3 | 3 | 6.974 | 6.794 | 6.324 | 6.212 | 0.125 |
| M8 | 4 | 12 | 7.972 | 7.76 | 7.16 | 7.042 | 0.156 |
| M10 | 5 | 15 | 9.968 | 9.732 | 8.994 | 8.862 | 0.188 |
| M12 | 6 | 18 | 11.966 | 11.701 | 10.829 | 10.679 | 0.219 |
| M14 | 8 | 24 | 13.962 | 13.682 | 12.663 | 12.503 | 0.25 |
| M16 | 8 | 24 | 15.962 | 15.682 | 14.663 | 14.503 | 0.25 |
| M18 | 10 | 30 | 17.958 | 17.623 | 16.334 | 16.164 | 0.313 |
| M20 | 10 | 30 | 19.958 | 19.623 | 18.334 | 18.164 | 0.313 |
| M22 | 10 | 30 | 21.958 | 21.623 | 20.334 | 20.164 | 0.313 |
| M24 | 12 | 36 | 23.952 | 23.577 | 22.003 | 21.803 | 0.375 |
| M27 | 12 | 36 | 26.952 | 26.577 | 25.003 | 24.803 | 0.375 |
| M30 | 15 | 45 | 29.947 | 29.522 | 27.674 | 27.462 | 0.438 |
| M33 | 15 | 45 | 32.947 | 32.522 | 30.674 | 30.462 | 0.438 |
| M36 | 18 | 53 | 35.94 | 35.465 | 33.342 | 33.118 | 0.5 |
| M39 | 18 | 53 | 38.94 | 38.465 | 36.342 | 36.118 | 0.5 |
| Konu Boyutu | Nişanlanmak Uzunluk Başlangıç Tarihi: | Nişanlanmak Uzunluk | Büyük çap (Maks.) | Büyük çap (Dk.) | Saha çapı (Maks.) | Saha çapı (Dk.) | Konu Kökü Yarıçap (Min) |
|---|---|---|---|---|---|---|---|
| M8x1 | 3 | 9 | 7.794 | 7.794 | 7.324 | 7.212 | 0.125 |
| M10x1 | 3 | 9 | 9.974 | 9.794 | 9.324 | 9212 | 0.156 |
| M10x1.25 | 4 | 12 | 9.972 | 9.76 | 9.16 | 9.042 | 0.156 |
| M12x1.25 | 4.5 | 13 | 11.972 | 11.76 | 11.16 | 11.028 | 0.156 |
| M12x1.5 | 5.6 | 16 | 11.968 | 11.732 | 10.994 | 10.854 | 0.156 |
| M14x1,5 | 5.6 | 16 | 13.968 | 13.732 | 12.994 | 12.854 | 0.188 |
| M16x1.5 | 5.6 | 16 | 15.968 | 15.732 | 14.994 | 14.854 | 0.188 |
| M18x1.5 | 5.6 | 16 | 17.968 | 17.732 | 16.994 | 16.854 | 0.188 |
| M18x2 | 8 | 24 | 17.952 | 17.682 | 16.663 | 0.188 | 0.188 |
| M20x1.5 | 5.6 | 16 | 19.968 | 19.732 | 18.994 | 18.854 | 0.188 |
| M20x2 | 8 | 24 | 19.962 | 19.682 | 18.663 | 18.503 | 0.188 |
| M22x1.5 | 5.6 | 16 | 21.968 | 21.732 | 20.994 | 20.854 | 0.188 |
| M22x2 | 8 | 24 | 21.962 | 21.682 | 20.663 | 20.503 | 0.188 |
| M24x2 | 8.5 | 25 | 23.962 | 23.682 | 22.663 | 22.493 | 0.25 |
| M27x2 | 8.5 | 25 | 26.962 | 26.682 | 25.663 | 25.493 | 0.25 |
| M30x2 | 8.5 | 25 | 29.962 | 29.682 | 28.663 | 28.493 | 0.25 |
| M33x2 | 8.5 | 25 | 32.962 | 32.682 | 31.663 | 31.493 | 0.25 |
| M36x3 | 12 | 36 | 35.952 | 35.577 | 34.003 | 33.803 | 0.375 |
| M39x3 | 12 | 36 | 38.952 | 38.577 | 37.003 | 36.803 | 0.375 |
Verimliliği Bulmanıza Yardımcı Olalım